Setting up tables: name, occupancy and buffer
- Waar vind ik dit
- Configuration › Modules › Floor plans › Editor › Table properties
Click a table in the editor and its properties panel opens on the right. This is where you determine the quality of your whole table allocation: what you enter here is what Gasto uses for every reservation that comes in.
Name
Use what your staff call it, not what looks logical. T1 is fine if that is how you work, but Window 3 or Bar left is better if that is the name heard on the floor. The name appears in the table plan, on the guest list and in your reporting.
Min and Max: the occupancy
Here you state the party sizes this table is usable for. A party outside that range will not be given the table. That works in both directions, and it is the lower end people forget.
Do not set Min to 1 on your large tables. If you do, a couple can end up at your table for eight, and at eight o’clock you have nowhere to put the party that actually is eight. A table for eight with a minimum of six keeps itself free for what it is meant for.
The upper end is simpler: Max is how many chairs fit around it decently. Not how many could theoretically be squeezed in.
Buffer before and after
The time you need to clear and reset, in minutes. That time counts as occupied: a table with a ten-minute after-buffer is only bookable again ten minutes after the guests leave.
Enter your real reset time here, not your best time. A buffer set too tight produces a guest seated at a table that is not ready — and they notice.
Zone and colour
Zone determines which section the table is in — window, terrace, lounge. Tables take on the colour of their zone unless you pick something else with Custom colour. Use a custom colour sparingly; if everything has its own colour, colour no longer says anything.
Tags: careful, this is a hard filter
Tags record properties of a table: wheelchair, vip, grill. That looks harmless, but the behaviour is strict. If you attach required tags to a product, only tables carrying all the listed tags qualify — and every table without tags drops out, even one that would otherwise be perfectly suitable.
So use tags only where it is genuinely a requirement, not where it is a wish. For a wish — the guest likes sitting by the window — use zones and preferences.
Removing a table
Gasto asks for confirmation and then reports how many future bookings were detached. Those still exist, but without a table, and wait in the table plan for a new spot. If someone is seated at the table right now, deletion does not go through.