Drawing your dining room

InstructionEasy
Waar vind ik dit
Configuration › Modules › Floor plans

Before Gasto can allocate tables, it needs to know what your room looks like. You draw it once. Count on half an hour for an average restaurant — and do not start from a blank sheet, because that is what the wizard is for.

The editor at a glance Tables Layout Manage zones Manage combinations Notes Palette Rect. table Round table drag The floorplan T1 T2 T3 T4 Table properties Name Min and Max (capacity) Buffer before and after (min) Zone Custom colour Tags R rotates 15°, Shift+R rotates 90° Scroll = zoom, Cmd/Ctrl+drag = pan

Start with the wizard

  1. Go to Configuration › Modules › Floor plans and click New floor plan.
  2. Give your plan a name — Ground floor, Terrace — and enter the Length and Width of the room in metres. Estimating is fine; you can adjust later.
  3. In step two, enter how many tables you have of each size: how many twos, how many fours, and so on.
  4. Click Create floor plan.

Gasto places the tables row by row, with half a metre along the wall and sixty centimetres of walkway between them, and then opens the editor straight away.

Then you drag them into place

The grid from the wizard is a starting point, not a dining room. In the editor you drag each table to where it really stands. Two things help:

  • Tables may not overlap. Drop one on top of another and the editor refuses the placement.
  • R rotates a table 15 degrees, Shift+R 90 degrees. Scrolling zooms in and out; holding Cmd or Ctrl and dragging pans the plan.

Walls, bar and kitchen

At the top there are two buttons: Tables and Layout. Under Layout you draw the fixed furnishings — walls, doors, the bar, the kitchen, the toilets. Nothing is booked on those; they are there so your staff recognise the plan as their own room. That is not a luxury: a plan you do not recognise will not be used during a busy service.

Or upload your own drawing

If you have an architect’s drawing or a plan from your interior builder, you can upload it as a background (PNG, JPG, WebP, GIF or SVG). The tables go on top of it. On upload, the plan takes on the dimensions of the image. Note: the background is only final once you click Save — until then it is marked Not yet saved.

More than one room

If you have a terrace, a conservatory or a separate room upstairs, you have a choice: everything on one plan, or a plan per room. One plan works more pleasantly during service — you see everything at a glance. Separate plans are handier if you want to switch off the whole terrace in bad weather: a floor plan can be set to inactive.